• Achilles Inflatable Boat

    Achilles Inflatable SGX 122

    SGX-122

    • Length 12’2” (365 cm)
    • Load Capacity 1520 lbs. (690 kg)
    • Person Capacity 6
    • Maximum H.P. 35 standard

    SGX Series

    Sport utility series

    These versatile aluminum and wood-floored boats are the perfect solution for a range of uses. They are rugged and roomy so they can be put to the test as dive boats, heavy duty tenders or utility boats. Their sporty nature also makes them great runabouts that really perform thanks to their deep “V” inflatable keel and large tube diameters. A range of quality features include a v-shaped fiberglass-encased transom and removable, dual position wood seat. Their Achilles CSM fabric and four-layer seam construction make these sport boats extremely tough... and tough to beat. SGX Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Aluminum and wood floorboards with aluminum stringer system
    • V-shaped fiberglass encased transom
    • Full-length teardrop rubbing strake
    • Deep “V” inflatable keel
    • Towing bridle D-rings
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Bow handle
    • Four lift and carry handles
    • Helmsman grip
    • Two bailer valves
    • Gas tank tie downs
    • Lifelines
    • Removable wood seat
    • Extra seat attachment patches
    • High-volume foot pump
    • Two carry bags
    • Maintenance kit
    Details
  • Achilles Inflatable Boat

    Achilles Inflatable FRB 124

    FRB-124

    • Length 12’4” (375 cm)
    • Load Capacity 1480 lbs. (670 kg)
    • Person Capacity 5
    • Maximum H.P. 25 standard

    FRB Series

    Sport utility series

    A versatile utility boat that’s ready to go in minutes.Designed originally as rapid response boats for fire departments and rescue units, these unique aluminum roll up floors with an innovative hinge system and non-skid panels can perform a variety of functions. They are easy to store or carry and can be set up in minutes. The main air chambers are equipped with over pressure relief valves. They can be inflated either by compressed air bottles or the standard equipment foot pump. In addition to their Achilles CSM fabric and four-layer seam construction, other special features like abrasion wear patches and removable storage bags make them practical alternatives for tackling a range of jobs on the water. FRB Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Deep “V” inflatable keel
    • Aluminum roll-up floor with nonskid panels, fiberglass encased v-shaped transom with protective motor clamp plate
    • Two paddles with interior tie downs
    • Towing bridle D-rings
    • Two removable storage bags
    • Full-length splash guard with life lines
    • Abrasion patches
    • Five interior tie-down D-rings
    • Full-length teardrop rubbing strake
    • Foot pump and maintenance kit
    • The FRB-104 has two over pressure relief valves, four lift and carry handles, interior bow lifting D-ring and bailer valve. The FRB-124 has four over pressure relief valves, six lift and carry handles, two bailer valves and heavy duty bailer sleeve.
    Details
  • Achilles Inflatable Boat

    Achilles Inflatable FRB 104

    FRB-104

    • Length 10’4” (315 cm)
    • Load Capacity 1210 lbs. (550 kg)
    • Person Capacity 4
    • Maximum H.P. 15 standard

    FRB Series

    Sport utility series

    A versatile utility boat that’s ready to go in minutes. Designed originally as rapid response boats for fire departments and rescue units, these unique aluminum roll up floors with an innovative hinge system and non-skid panels can perform a variety of functions. They are easy to store or carry and can be set up in minutes. The main air chambers are equipped with over pressure relief valves. They can be inflated either by compressed air bottles or the standard equipment foot pump. In addition to their Achilles CSM fabric and four-layer seam construction, other special features like abrasion wear patches and removable storage bags make them practical alternatives for tackling a range of jobs on the water. FRB Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Deep “V” inflatable keel
    • Aluminum roll-up floor with nonskid panels, fiberglass encased v-shaped transom with protective motor clamp plate
    • Two paddles with interior tie downs
    • Towing bridle D-rings
    • Two removable storage bags
    • Full-length splash guard with life lines
    • Abrasion patches
    • Five interior tie-down D-rings
    • Full-length teardrop rubbing strake
    • Foot pump and maintenance kit
    • The FRB-104 has two over pressure relief valves, four lift and carry handles, interior bow lifting D-ring and bailer valve. The FRB-124 has four over pressure relief valves, six lift and carry handles, two bailer valves and heavy duty bailer sleeve.
    Details
  • Achilles Inflatable Boat

    Achilles Inflatable HB 385DX

    HB-385DX

    • Length 12'8" (385 cm)
    • Load Capacity 1790 lbs. (810 kg)
    • Person Capacity 7
    • Maximum H.P. 40 long

    HB-DX Series

    Rigid hull series

    These deluxe hard bottom inflatables offer boaters the best combination of style, performance and functionality.Sleek, Euro-style tubes give them a stylish edge over other RIB’s. A deep “V” fiberglass hull delivers superior performance while a built-in bow locker provides both a seat and a place for gear. If you want to take a step above the norm in a hard-bottomed tender, step up to an Achilles HB-DX RIB. Like every Achilles boat they are made with our own Achilles CSM fabric so they can handle the burning sun of the tropics or cold northern waters without fading or deteriorating. Choose a rigid-hulled inflatable that gives you a little extra. Choose an Achilles HB-DX.New Seat and Console Kits Now Available!We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options. The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired. The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION). The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls. HB-DX Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Deep “V” fiberglass hull
    • Bow locker
    • Double heavy-duty full-length teardrop rubbing strake
    • Extra seat attachment patches
    • Helmsman grip
    • Removable aluminum rowing seat (Except HB-385DX which has a wooden seat)
    • D-rings for towing bridle
    • Stainless bow eye
    • Lifting hardware for davits
    • Molded rubber bow handle, carry handles, and helmsman grip
    • Webbed passenger handles
    • Interior oar straps
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders (HB-385DX has paddle)
    • Gas tank tie down hardware
    • Protective transom motor clamp plate
    • Bailer valve
    • Foot pump
    • Maintenance kit
     
    Details
  • Achilles Inflatable Boat

    Achilles Inflatable HB 315DX

    HB-315DX

    • Length 10'4" (315 cm)
    • Load Capacity 1300 lbs. (590 kg)
    • Person Capacity 5
    • Maximum H.P. 20 standard

    HB-DX Series

    Rigid hull series

    These deluxe hard bottom inflatables offer boaters the best combination of style, performance and functionality.Sleek, Euro-style tubes give them a stylish edge over other RIB’s. A deep “V” fiberglass hull delivers superior performance while a built-in bow locker provides both a seat and a place for gear. If you want to take a step above the norm in a hard-bottomed tender, step up to an Achilles HB-DX RIB. Like every Achilles boat they are made with our own Achilles CSM fabric so they can handle the burning sun of the tropics or cold northern waters without fading or deteriorating. Choose a rigid-hulled inflatable that gives you a little extra. Choose an Achilles HB-DX. New Seat and Console Kits Now Available! We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options. The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired. The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION). The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls. HB-DX Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Deep “V” fiberglass hull
    • Bow locker
    • Double heavy-duty full-length teardrop rubbing strake
    • Extra seat attachment patches
    • Helmsman grip
    • Removable aluminum rowing seat (Except HB-385DX which has a wooden seat)
    • D-rings for towing bridle
    • Stainless bow eye
    • Lifting hardware for davits
    • Molded rubber bow handle, carry handles, and helmsman grip
    • Webbed passenger handles
    • Interior oar straps
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders (HB-385DX has paddle)
    • Gas tank tie down hardware
    • Protective transom motor clamp plate
    • Bailer valve
    • Foot pump
    • Maintenance kit
     
    Details
  • Achilles Inflatable Boat

    Achilles Inflatable HB 280DX

    HB-280DX

    • Length 9'2" (280 cm)
    • Load Capacity 1190 lbs. (540 kg)
    • Person Capacity 4
    • Maximum H.P. 15 standard

    HB-DX Series

    Rigid hull series

    These deluxe hard bottom inflatables offer boaters the best combination of style, performance and functionality. Sleek, Euro-style tubes give them a stylish edge over other RIB’s. A deep “V” fiberglass hull delivers superior performance while a built-in bow locker provides both a seat and a place for gear. If you want to take a step above the norm in a hard-bottomed tender, step up to an Achilles HB-DX RIB. Like every Achilles boat they are made with our own Achilles CSM fabric so they can handle the burning sun of the tropics or cold northern waters without fading or deteriorating. Choose a rigid-hulled inflatable that gives you a little extra. Choose an Achilles HB-DX. New Seat and Console Kits Now Available! We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options. The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired. The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION). The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls. HB-DX Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Deep “V” fiberglass hull
    • Bow locker
    • Double heavy-duty full-length teardrop rubbing strake
    • Extra seat attachment patches
    • Helmsman grip
    • Removable aluminum rowing seat (Except HB-385DX which has a wooden seat)
    • D-rings for towing bridle
    • Stainless bow eye
    • Lifting hardware for davits
    • Molded rubber bow handle, carry handles, and helmsman grip
    • Webbed passenger handles
    • Interior oar straps
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders (HB-385DX has paddle)
    • Gas tank tie down hardware
    • Protective transom motor clamp plate
    • Bailer valve
    • Foot pump
    • Maintenance kit
     
    Details
  • Achilles Inflatable Boat

    Achilles Inflatable HB 350LX

    HB-350LX

    • Length 11’6” (350 cm)
    • Load Capacity 1680 lbs. (760 kg)
    • Person Capacity 6
    • Maximum H.P. 20 standard

    HB-LX Series

    Rigid hull series

    A lightweight rigid hull series packed with high performance features.The Achilles HB-LX boats provide the critically acclaimed performance of the Achilles DX deep “V” fiberglass hull design in a lighter RIB. They also have the same tube design as the DX series, yet a modification of the deck design and removing the bow locker results in a RIB that is on average 20% lighter than the same size DX model.This means they can perform well with smaller engines and can be carried or transported more easily. Despite their lighter weight and lower cost compared to the HB-DX series, they are still loaded with all the high quality standard features for which Achilles is known.New Seat and Console Kits Now Available! We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options.   The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired.   The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION).   The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls.   HB-LX Standard Features include:
    • Pearl Gray Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Deep “V” fiberglass hull
    • Full-length teardrop rubbing strake
    • Removable wood rowing seat
    • D-rings for towing bridle
    • Stainless bow eye
    • Lifting hardware for davits
    • Webbed passenger, helmsman, and rear carry handles
    • Bow carry handle
    • Interior oar straps (except HB240-LX)
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Gas tank tie down hardware
    • Protective transom motor clamp plate
    • Extra seat attachment patches (except HB240-LX)
    • Bailer valve
    • Foot pump
    • Maintenance kit
    Details
  • Achilles Inflatable Boat

    Achilles Inflatable HB 315LX

    HB-315LX

    • Length 10'4" (315 cm)
    • Load Capacity 1320 lbs. (600 kg)
    • Person Capacity 5
    • Maximum H.P. 15 standard
     

    HB-LX Series

    Rigid hull series

    A lightweight rigid hull series packed with high performance features.The Achilles HB-LX boats provide the critically acclaimed performance of the Achilles DX deep “V” fiberglass hull design in a lighter RIB. They also have the same tube design as the DX series, yet a modification of the deck design and removing the bow locker results in a RIB that is on average 20% lighter than the same size DX model.This means they can perform well with smaller engines and can be carried or transported more easily. Despite their lighter weight and lower cost compared to the HB-DX series, they are still loaded with all the high quality standard features for which Achilles is known.  New Seat and Console Kits Now Available! We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options.   The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired.   The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION).   The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls.   HB-LX Standard Features include:
    • Pearl Gray Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Deep “V” fiberglass hull
    • Full-length teardrop rubbing strake
    • Removable wood rowing seat
    • D-rings for towing bridle
    • Stainless bow eye
    • Lifting hardware for davits
    • Webbed passenger, helmsman, and rear carry handles
    • Bow carry handle
    • Interior oar straps (except HB240-LX)
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Gas tank tie down hardware
    • Protective transom motor clamp plate
    • Extra seat attachment patches (except HB240-LX)
    • Bailer valve
    • Foot pump
    • Maintenance kit
    Details
  • Achilles Inflatable Boat

    Achilles Inflatable HB 280LX

    HB-280LX

    • Length 9’2” (280 cm)
    • Load Capacity 1210 lbs. (550 kg)
    • Person Capacity 4
    • Maximum H.P. 10 standard

    HB-LX Series

    Rigid hull series

    A lightweight rigid hull series packed with high performance features.The Achilles HB-LX boats provide the critically acclaimed performance of the Achilles DX deep “V” fiberglass hull design in a lighter RIB. They also have the same tube design as the DX series, yet a modification of the deck design and removing the bow locker results in a RIB that is on average 20% lighter than the same size DX model.This means they can perform well with smaller engines and can be carried or transported more easily. Despite their lighter weight and lower cost compared to the HB-DX series, they are still loaded with all the high quality standard features for which Achilles is known.   New Seat and Console Kits Now Available! We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options.   The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired.   The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION).   The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls.   HB-LX Standard Features include:
    • Pearl Gray Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Deep “V” fiberglass hull
    • Full-length teardrop rubbing strake
    • Removable wood rowing seat
    • D-rings for towing bridle
    • Stainless bow eye
    • Lifting hardware for davits
    • Webbed passenger, helmsman, and rear carry handles
    • Bow carry handle
    • Interior oar straps (except HB240-LX)
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Gas tank tie down hardware
    • Protective transom motor clamp plate
    • Extra seat attachment patches (except HB240-LX)
    • Bailer valve
    • Foot pump
    • Maintenance kit
    Details
  • Achilles Inflatable Boat

    Achilles Inflatable HB 240LX

    HB-240LX

    • Length 7’10” (240 cm)
    • Load Capacity 900 lbs. (410 kg)
    • Person Capacity 3
    • Maximum H.P. 5 standard

    HB-LX Series

    Rigid hull series

    A lightweight rigid hull series packed with high performance features.The Achilles HB-LX boats provide the critically acclaimed performance of the Achilles DX deep “V” fiberglass hull design in a lighter RIB. They also have the same tube design as the DX series, yet a modification of the deck design and removing the bow locker results in a RIB that is on average 20% lighter than the same size DX model. This means they can perform well with smaller engines and can be carried or transported more easily. Despite their lighter weight and lower cost compared to the HB-DX series, they are still loaded with all the high quality standard features for which Achilles is known.   New Seat and Console Kits Now Available! We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options.   The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired.   The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION).   The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls.   HB-LX Standard Features include:
    • Pearl Gray Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Deep “V” fiberglass hull
    • Full-length teardrop rubbing strake
    • Removable wood rowing seat
    • D-rings for towing bridle
    • Stainless bow eye
    • Lifting hardware for davits
    • Webbed passenger, helmsman, and rear carry handles
    • Bow carry handle
    • Interior oar straps (except HB240-LX)
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Gas tank tie down hardware
    • Protective transom motor clamp plate
    • Extra seat attachment patches (except HB240-LX)
    • Bailer valve
    • Foot pump
    • Maintenance kit
    Details
  • Achilles Inflatable Boat

    Achilles Inflatable HB 300FX

    HB 300FX

    • Length 9’10” (300 cm)
    • Load Capacity 1260 lbs. (570 kg)
    • Person Capacity 4
    • Maximum H.P. 10 standard

    HB-FX Series

    Rigid hull series

    An innovative folding transom makes these lightweight RIBs the easiest to transport, carry, and launch. The Achilles HB-FX boats feature a unique folding transom, lightweight design, and full-length carry bag that combine to make these rigid hull models the easiest to transport and launch. Despite their lighter weight, both these popular FX models offer large load capacities and the ability to carry four people. The Achilles HB-FX series offers boaters the most convenient RIBs available.   HB-FX Standard Features include:
    • Pearl Gray Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Modified "V" fiberglass hull
    • Folding fiberglass transom
    • Full-length carry bag
    • Full-length teardrop rubbing strake
    • D-rings for towing bridle
    • Stainless steel bow eye
    • Inside bow davit lifting eye
    • Bow carry handle
    • Webbed passenger, helmsman, and rear carry handles
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Interior oar straps (HB-300FX only)
    • Gas tank tie down hardware
    • Protective transom motor clamp plate
    • Removable aluminum rowing seat
    • Extra seat attachment patches (HB-300FX only)
    • Bailer valve
    • Foot pump
    • Maintenance kit

    HB-FX Series

    Rigid hull series

    An innovative folding transom makes these lightweight RIBs the easiest to transport, carry, and launch.The Achilles HB-FX boats feature a unique folding transom, lightweight design, and full-length carry bag that combine to make these rigid hull models the easiest to transport and launch. Despite their lighter weight, both these popular FX models offer large load capacities and the ability to carry four people. The Achilles HB-FX series offers boaters the most convenient RIBs available.  HB-FX Standard Features include:
    • Pearl Gray Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Modified "V" fiberglass hull
    • Folding fiberglass transom
    • Full-length carry bag
    • Full-length teardrop rubbing strake
    • D-rings for towing bridle
    • Stainless steel bow eye
    • Inside bow davit lifting eye
    • Bow carry handle
    • Webbed passenger, helmsman, and rear carry handles
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Interior oar straps (HB-300FX only)
    • Gas tank tie down hardware
    • Protective transom motor clamp plate
    • Removable aluminum rowing seat
    • Extra seat attachment patches (HB-300FX only)
    • Bailer valve
    • Foot pump
    • Maintenance kit
    Details
  • Achilles Inflatable Boat

    Achilles Inflatable HB 270FX

    HB-270FX

    • Length 8’10” (270 cm)
    • Load Capacity 1010 lbs. (460 kg)
    • Person Capacity 4
    • Maximum H.P. 8 standard

    HB-FX Series

    Rigid hull series

    An innovative folding transom makes these lightweight RIBs the easiest to transport, carry, and launch. The Achilles HB-FX boats feature a unique folding transom, lightweight design, and full-length carry bag that combine to make these rigid hull models the easiest to transport and launch. Despite their lighter weight, both these popular FX models offer large load capacities and the ability to carry four people. The Achilles HB-FX series offers boaters the most convenient RIBs available.   HB-FX Standard Features include:
    • Pearl Gray Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Modified "V" fiberglass hull
    • Folding fiberglass transom
    • Full-length carry bag
    • Full-length teardrop rubbing strake
    • D-rings for towing bridle
    • Stainless steel bow eye
    • Inside bow davit lifting eye
    • Bow carry handle
    • Webbed passenger, helmsman, and rear carry handles
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Interior oar straps (HB-300FX only)
    • Gas tank tie down hardware
    • Protective transom motor clamp plate
    • Removable aluminum rowing seat
    • Extra seat attachment patches (HB-300FX only)
    • Bailer valve
    • Foot pump
    • Maintenance kit
    Details
Go to Top