Shop - Dinghy Doctor

Achilles Inflatable FRB 104
FRB-104

Length 10’4” (315 cm)

Load Capacity 1210 lbs. (550 kg)

Person Capacity 4

Maximum H.P. 15 standard

FRB Series

Sport utility series

A versatile utility boat that’s ready to go in minutes. Designed originally as rapid response boats for fire departments and rescue units, these unique aluminum roll up floors with an innovative hinge system and non-skid panels can perform a variety of functions. They are easy to store or carry and can be set up in minutes. The main air chambers are equipped with over pressure relief valves. They can be inflated either by compressed air bottles or the standard equipment foot pump. In addition to their Achilles CSM fabric and four-layer seam construction, other special features like abrasion wear patches and removable storage bags make them practical alternatives for tackling a range of jobs on the water. FRB Standard Features include:

Achilles CSM reinforced fabric

Four-layer seam construction

Deep “V” inflatable keel

Aluminum roll-up floor with nonskid panels, fiberglass encased v-shaped transom with protective motor clamp plate

Two paddles with interior tie downs

Towing bridle D-rings

Two removable storage bags

Full-length splash guard with life lines

Abrasion patches

Five interior tie-down D-rings

Full-length teardrop rubbing strake

Foot pump and maintenance kit

The FRB-104 has two over pressure relief valves, four lift and carry handles, interior bow lifting D-ring and bailer valve. The FRB-124 has four over pressure relief valves, six lift and carry handles, two bailer valves and heavy duty bailer sleeve.
Details
Achilles Inflatable FRB 124
FRB-124

Length 12’4” (375 cm)

Load Capacity 1480 lbs. (670 kg)

Person Capacity 5

Maximum H.P. 25 standard

FRB Series

Sport utility series

A versatile utility boat that’s ready to go in minutes.Designed originally as rapid response boats for fire departments and rescue units, these unique aluminum roll up floors with an innovative hinge system and non-skid panels can perform a variety of functions. They are easy to store or carry and can be set up in minutes. The main air chambers are equipped with over pressure relief valves. They can be inflated either by compressed air bottles or the standard equipment foot pump. In addition to their Achilles CSM fabric and four-layer seam construction, other special features like abrasion wear patches and removable storage bags make them practical alternatives for tackling a range of jobs on the water. FRB Standard Features include:

Achilles CSM reinforced fabric

Four-layer seam construction

Deep “V” inflatable keel

Aluminum roll-up floor with nonskid panels, fiberglass encased v-shaped transom with protective motor clamp plate

Two paddles with interior tie downs

Towing bridle D-rings

Two removable storage bags

Full-length splash guard with life lines

Abrasion patches

Five interior tie-down D-rings

Full-length teardrop rubbing strake

Foot pump and maintenance kit

The FRB-104 has two over pressure relief valves, four lift and carry handles, interior bow lifting D-ring and bailer valve. The FRB-124 has four over pressure relief valves, six lift and carry handles, two bailer valves and heavy duty bailer sleeve.
Details
Achilles Inflatable HB 240AL
HB-240AL

Length 7'10" (240 cm)

Load Capacity 880 lbs (400 kg)

Person Capacity 3

Maximum H.P. 6 Standard

HB-AL Series

Rigid hull series

Our aluminum hull ribs let you go anywhere. We’ve incorporated all the best features of our pacesetting HB fiberglass hull inflatable boats into the HB-AL series. These rugged boats feature a marine grade aluminum hull that is powder-coated to ensure a smooth, long lasting finish. They offer the advantage of being lightweight yet remark- ably strong and durable. A modified V hull, combined with their lightweight, allow HB-AL boats to cut through water efficiently with less horsepower. All three HB-AL boats are single hull models that keep the weight of the boats down. They also all have non-skid deck patches for better traction, safety and comfort. All of this is in addition to a host of other great features perfected by Achilles through our years as a leader in RIB design and inflatable boat technology. The HB-AL boats are a great choice for boaters who want a fuel-efficient and well-performing RIB that can handle rocky coastlines, coral, frequent beaching, and anything else you can throw at them. HB-AL Standard Features include:

Achilles CSM reinforced fabric

Four layer seam construction

Powder-coated aluminum hull with non-skid patches (HB-310AL has full deck liner)

Hull keel guard

Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders

Interior oar straps (HB-310AL only)

Full-length teardrop rubbing strake

Towing bridle D-rings

Welded bow eye

Inside bow davit lifting eye

Stern mounted davit lifting eyes

Outside transom towing eyes

Protective transom motor clamp plate

Bow and stern carry handles

Webbed passenger handles and helmsman handles

Removable Aluminum rowing seat (gray painted)

Extra seat attachment patches (except the HB-240AL)

Bailer valve

Foot pump

Maintenance kit
Details
Achilles Inflatable HB 240LX
HB-240LX

Length 7’10” (240 cm)

Load Capacity 900 lbs. (410 kg)

Person Capacity 3

Maximum H.P. 5 standard

HB-LX Series

Rigid hull series

A lightweight rigid hull series packed with high performance features.The Achilles HB-LX boats provide the critically acclaimed performance of the Achilles DX deep “V” fiberglass hull design in a lighter RIB. They also have the same tube design as the DX series, yet a modification of the deck design and removing the bow locker results in a RIB that is on average 20% lighter than the same size DX model. This means they can perform well with smaller engines and can be carried or transported more easily. Despite their lighter weight and lower cost compared to the HB-DX series, they are still loaded with all the high quality standard features for which Achilles is known. New Seat and Console Kits Now Available! We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options. The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired. The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION). The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls. HB-LX Standard Features include:

Pearl Gray Achilles CSM reinforced fabric

Four-layer seam construction

Deep “V” fiberglass hull

Full-length teardrop rubbing strake

Removable wood rowing seat

D-rings for towing bridle

Stainless bow eye

Lifting hardware for davits

Webbed passenger, helmsman, and rear carry handles

Bow carry handle

Interior oar straps (except HB240-LX)

Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders

Gas tank tie down hardware

Protective transom motor clamp plate

Extra seat attachment patches (except HB240-LX)

Bailer valve

Foot pump

Maintenance kit
Details
Achilles Inflatable HB 270AL
HB-270AL

Length 8'10" (270 cm)

Load Capacity 990 lbs (450 kg)

Person Capacity 4

Maximum H.P. 8 Standard

HB-AL Series

Rigid hull series

Our aluminum hull ribs let you go anywhere.We’ve incorporated all the best features of our pacesetting HB fiberglass hull inflatable boats into the HB-AL series. These rugged boats feature a marine grade aluminum hull that is powder-coated to ensure a smooth, long lasting finish. They offer the advantage of being lightweight yet remark- ably strong and durable. A modified V hull, combined with their lightweight, allow HB-AL boats to cut through water efficiently with less horsepower.All three HB-AL boats are single hull models that keep the weight of the boats down. They also all have non-skid deck patches for better traction, safety and comfort. All of this is in addition to a host of other great features perfected by Achilles through our years as a leader in RIB design and inflatable boat technology. The HB-AL boats are a great choice for boaters who want a fuel-efficient and well-performing RIB that can handle rocky coastlines, coral, frequent beaching, and anything else you can throw at them. HB-AL Standard Features include:

Achilles CSM reinforced fabric

Four layer seam construction

Powder-coated aluminum hull with non-skid patches (HB-310AL has full deck liner)

Hull keel guard

Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders

Interior oar straps (HB-310AL only)

Full-length teardrop rubbing strake

Towing bridle D-rings

Welded bow eye

Inside bow davit lifting eye

Stern mounted davit lifting eyes

Outside transom towing eyes

Protective transom motor clamp plate

Bow and stern carry handles

Webbed passenger handles and helmsman handles

Removable Aluminum rowing seat (gray painted)

Extra seat attachment patches (except the HB-240AL)

Bailer valve

Foot pump

Maintenance kit
Details
Achilles Inflatable HB 270AX
HB-270AX

Length 8’10” (270 cm)

Load Capacity 990 lbs (450 kg)

Person Capacity 4

Maximum H.P. 10 Standard

HB-AX Series

Rigid hull series

New HB-335AX Pro Commercial and Rescue RIB!The Achilles HB-AX aluminum hull series expands again in 2019 with the addition of the HB-335AX PRO. This new model is only available in red for increased visibility and is designed for heavy duty commercial and rescue use. It has a full length splashguard with lifelines, abrasion/wear patches on top of the tubes, and has a paddle in place of oars and oarlocks. Like all Achilles HB-AX models it features a tough, powder coated marine grade aluminum hull with a full length keel guard to stand up to frequent beachings, coral, rocks, and other rough surfaces. The double heavy-duty rubbing strake on all HB-AX models offers addition protection to the tubes from rocks, docks, and pilings. All HB-AX models also come with a vented bow locker large enough to accommodate a gas tank, and the ability to run a fuel line under the deck that enables you to free up deck space that is usually taken up by the fuel tank and fuel line. It also helps distribute weight more evenly by moving the gas tank forward. The flat deck with non-skid patches also offers better traction, safety, and comfort. This unique design also allows water to flow under the deck to keep your feet dry if any water gets into the boat. New Seat and Console Kits Now Available! We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options. The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired. The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION). The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls. HB-AX Standard Features include:

Achilles CSM reinforced fabric

Four layer seam construction

Powder-coated aluminum hull with keel guard

Full length deck liner with non-skid patches

Bow locker

Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders

Interior oar straps

Double heavy-duty full length teardrop rubbing strake

Towing bridle D-rings

Welded bow eye, inside bow davit lifting eye, stern mounted davit lifting eyes, outside transom towing eyes

Protective transom motor clamp plate

Molded bow and stern lift and carry handles

Webbed passenger handles and helmsman handles

Removable aluminum rowing seat

Extra seat attachment patches

Bailer valve

Foot pump

Maintenance kit
Details
Achilles Inflatable HB 270FX
HB-270FX

Length 8’10” (270 cm)

Load Capacity 1010 lbs. (460 kg)

Person Capacity 4

Maximum H.P. 8 standard

HB-FX Series

Rigid hull series

An innovative folding transom makes these lightweight RIBs the easiest to transport, carry, and launch. The Achilles HB-FX boats feature a unique folding transom, lightweight design, and full-length carry bag that combine to make these rigid hull models the easiest to transport and launch. Despite their lighter weight, both these popular FX models offer large load capacities and the ability to carry four people. The Achilles HB-FX series offers boaters the most convenient RIBs available. HB-FX Standard Features include:

Pearl Gray Achilles CSM reinforced fabric

Four-layer seam construction

Modified "V" fiberglass hull

Folding fiberglass transom

Full-length carry bag

Full-length teardrop rubbing strake

D-rings for towing bridle

Stainless steel bow eye

Inside bow davit lifting eye

Bow carry handle

Webbed passenger, helmsman, and rear carry handles

Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders

Interior oar straps (HB-300FX only)

Gas tank tie down hardware

Protective transom motor clamp plate

Removable aluminum rowing seat

Extra seat attachment patches (HB-300FX only)

Bailer valve

Foot pump

Maintenance kit
Details
Achilles Inflatable HB 280DX
HB-280DX

Length 9'2" (280 cm)

Load Capacity 1190 lbs. (540 kg)

Person Capacity 4

Maximum H.P. 15 standard

HB-DX Series

Rigid hull series

These deluxe hard bottom inflatables offer boaters the best combination of style, performance and functionality. Sleek, Euro-style tubes give them a stylish edge over other RIB’s. A deep “V” fiberglass hull delivers superior performance while a built-in bow locker provides both a seat and a place for gear. If you want to take a step above the norm in a hard-bottomed tender, step up to an Achilles HB-DX RIB. Like every Achilles boat they are made with our own Achilles CSM fabric so they can handle the burning sun of the tropics or cold northern waters without fading or deteriorating. Choose a rigid-hulled inflatable that gives you a little extra. Choose an Achilles HB-DX. New Seat and Console Kits Now Available! We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options. The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired. The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION). The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls. HB-DX Standard Features include:

Achilles CSM reinforced fabric

Four-layer seam construction

Deep “V” fiberglass hull

Bow locker

Double heavy-duty full-length teardrop rubbing strake

Extra seat attachment patches

Helmsman grip

Removable aluminum rowing seat (Except HB-385DX which has a wooden seat)

D-rings for towing bridle

Stainless bow eye

Lifting hardware for davits

Molded rubber bow handle, carry handles, and helmsman grip

Webbed passenger handles

Interior oar straps

Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders (HB-385DX has paddle)

Gas tank tie down hardware

Protective transom motor clamp plate

Bailer valve

Foot pump

Maintenance kit
Details
Achilles Inflatable HB 280LX
HB-280LX

Length 9’2” (280 cm)

Load Capacity 1210 lbs. (550 kg)

Person Capacity 4

Maximum H.P. 10 standard

HB-LX Series

Rigid hull series

A lightweight rigid hull series packed with high performance features.The Achilles HB-LX boats provide the critically acclaimed performance of the Achilles DX deep “V” fiberglass hull design in a lighter RIB. They also have the same tube design as the DX series, yet a modification of the deck design and removing the bow locker results in a RIB that is on average 20% lighter than the same size DX model.This means they can perform well with smaller engines and can be carried or transported more easily. Despite their lighter weight and lower cost compared to the HB-DX series, they are still loaded with all the high quality standard features for which Achilles is known. New Seat and Console Kits Now Available! We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options. The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired. The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION). The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls. HB-LX Standard Features include:

Pearl Gray Achilles CSM reinforced fabric

Four-layer seam construction

Deep “V” fiberglass hull

Full-length teardrop rubbing strake

Removable wood rowing seat

D-rings for towing bridle

Stainless bow eye

Lifting hardware for davits

Webbed passenger, helmsman, and rear carry handles

Bow carry handle

Interior oar straps (except HB240-LX)

Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders

Gas tank tie down hardware

Protective transom motor clamp plate

Extra seat attachment patches (except HB240-LX)

Bailer valve

Foot pump

Maintenance kit
Details
Achilles Inflatable HB 300FX
HB 300FX

Length 9’10” (300 cm)

Load Capacity 1260 lbs. (570 kg)

Person Capacity 4

Maximum H.P. 10 standard

HB-FX Series

Rigid hull series

An innovative folding transom makes these lightweight RIBs the easiest to transport, carry, and launch. The Achilles HB-FX boats feature a unique folding transom, lightweight design, and full-length carry bag that combine to make these rigid hull models the easiest to transport and launch. Despite their lighter weight, both these popular FX models offer large load capacities and the ability to carry four people. The Achilles HB-FX series offers boaters the most convenient RIBs available. HB-FX Standard Features include:

Pearl Gray Achilles CSM reinforced fabric

Four-layer seam construction

Modified "V" fiberglass hull

Folding fiberglass transom

Full-length carry bag

Full-length teardrop rubbing strake

D-rings for towing bridle

Stainless steel bow eye

Inside bow davit lifting eye

Bow carry handle

Webbed passenger, helmsman, and rear carry handles

Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders

Interior oar straps (HB-300FX only)

Gas tank tie down hardware

Protective transom motor clamp plate

Removable aluminum rowing seat

Extra seat attachment patches (HB-300FX only)

Bailer valve

Foot pump

Maintenance kit

HB-FX Series

Rigid hull series

An innovative folding transom makes these lightweight RIBs the easiest to transport, carry, and launch.The Achilles HB-FX boats feature a unique folding transom, lightweight design, and full-length carry bag that combine to make these rigid hull models the easiest to transport and launch. Despite their lighter weight, both these popular FX models offer large load capacities and the ability to carry four people. The Achilles HB-FX series offers boaters the most convenient RIBs available. HB-FX Standard Features include:

Pearl Gray Achilles CSM reinforced fabric

Four-layer seam construction

Modified "V" fiberglass hull

Folding fiberglass transom

Full-length carry bag

Full-length teardrop rubbing strake

D-rings for towing bridle

Stainless steel bow eye

Inside bow davit lifting eye

Bow carry handle

Webbed passenger, helmsman, and rear carry handles

Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders

Interior oar straps (HB-300FX only)

Gas tank tie down hardware

Protective transom motor clamp plate

Removable aluminum rowing seat

Extra seat attachment patches (HB-300FX only)

Bailer valve

Foot pump

Maintenance kit
Details
Achilles Inflatable HB 310AL
HB-310AL

Length 10'2" (310 cm)

Load Capacity 1190 lbs. (540 kg)

Person Capacity 4

Maximum H.P. 15 standard

HB-AL Series

Rigid hull series

Our aluminum hull ribs let you go anywhere.We’ve incorporated all the best features of our pacesetting HB fiberglass hull inflatable boats into the HB-AL series. These rugged boats feature a marine grade aluminum hull that is powder-coated to ensure a smooth, long lasting finish. They offer the advantage of being lightweight yet remark- ably strong and durable. A modified V hull, combined with their lightweight, allow HB-AL boats to cut through water efficiently with less horsepower. All three HB-AL boats are single hull models that keep the weight of the boats down. They also all have non-skid deck patches for better traction, safety and comfort. All of this is in addition to a host of other great features perfected by Achilles through our years as a leader in RIB design and inflatable boat technology. The HB-AL boats are a great choice for boaters who want a fuel-efficient and well-performing RIB that can handle rocky coastlines, coral, frequent beaching, and anything else you can throw at them. HB-AL Standard Features include:

Achilles CSM reinforced fabric

Four layer seam construction

Powder-coated aluminum hull with non-skid patches (HB-310AL has full deck liner)

Hull keel guard

Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders

Interior oar straps (HB-310AL only)

Full-length teardrop rubbing strake

Towing bridle D-rings

Welded bow eye

Inside bow davit lifting eye

Stern mounted davit lifting eyes

Outside transom towing eyes

Protective transom motor clamp plate

Bow and stern carry handles

Webbed passenger handles and helmsman handles

Removable Aluminum rowing seat (gray painted)

Extra seat attachment patches (except the HB-240AL)

Bailer valve

Foot pump

Maintenance kit
Details
Achilles Inflatable HB 310AX
HB-310AX

Length 10' 2" (310 cm)

Load Capacity 1120 lbs (510 kg)

Person Capacity 4

Maximum H.P. 20 Standard

HB-AX Series

Rigid hull series

New HB-335AX Pro Commercial and Rescue RIB!The Achilles HB-AX aluminum hull series expands again in 2019 with the addition of the HB-335AX PRO. This new model is only available in red for increased visibility and is designed for heavy duty commercial and rescue use. It has a full length splashguard with lifelines, abrasion/wear patches on top of the tubes, and has a paddle in place of oars and oarlocks. Like all Achilles HB-AX models it features a tough, powder coated marine grade aluminum hull with a full length keel guard to stand up to frequent beachings, coral, rocks, and other rough surfaces. The double heavy-duty rubbing strake on all HB-AX models offers addition protection to the tubes from rocks, docks, and pilings. All HB-AX models also come with a vented bow locker large enough to accommodate a gas tank, and the ability to run a fuel line under the deck that enables you to free up deck space that is usually taken up by the fuel tank and fuel line. It also helps distribute weight more evenly by moving the gas tank forward. The flat deck with non-skid patches also offers better traction, safety, and comfort. This unique design also allows water to flow under the deck to keep your feet dry if any water gets into the boat.New Seat and Console Kits Now Available! We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options. The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired. The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION). The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls. HB-AX Standard Features include:

Achilles CSM reinforced fabric

Four layer seam construction

Powder-coated aluminum hull with keel guard

Full length deck liner with non-skid patches

Bow locker

Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders

Interior oar straps

Double heavy-duty full length teardrop rubbing strake

Towing bridle D-rings

Welded bow eye, inside bow davit lifting eye, stern mounted davit lifting eyes, outside transom towing eyes

Protective transom motor clamp plate

Molded bow and stern lift and carry handles

Webbed passenger handles and helmsman handles

Removable aluminum rowing seat

Extra seat attachment patches

Bailer valve

Foot pump

Maintenance kit
Details