• FRB-104

    • Length 10’4” (315 cm)
    • Load Capacity 1210 lbs. (550 kg)
    • Person Capacity 4
    • Maximum H.P. 15 standard

    FRB Series

    Sport utility series

    A versatile utility boat that’s ready to go in minutes. Designed originally as rapid response boats for fire departments and rescue units, these unique aluminum roll up floors with an innovative hinge system and non-skid panels can perform a variety of functions. They are easy to store or carry and can be set up in minutes. The main air chambers are equipped with over pressure relief valves. They can be inflated either by compressed air bottles or the standard equipment foot pump. In addition to their Achilles CSM fabric and four-layer seam construction, other special features like abrasion wear patches and removable storage bags make them practical alternatives for tackling a range of jobs on the water. FRB Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Deep “V” inflatable keel
    • Aluminum roll-up floor with nonskid panels, fiberglass encased v-shaped transom with protective motor clamp plate
    • Two paddles with interior tie downs
    • Towing bridle D-rings
    • Two removable storage bags
    • Full-length splash guard with life lines
    • Abrasion patches
    • Five interior tie-down D-rings
    • Full-length teardrop rubbing strake
    • Foot pump and maintenance kit
    • The FRB-104 has two over pressure relief valves, four lift and carry handles, interior bow lifting D-ring and bailer valve. The FRB-124 has four over pressure relief valves, six lift and carry handles, two bailer valves and heavy duty bailer sleeve.
  • FRB-124

    • Length 12’4” (375 cm)
    • Load Capacity 1480 lbs. (670 kg)
    • Person Capacity 5
    • Maximum H.P. 25 standard

    FRB Series

    Sport utility series

    A versatile utility boat that’s ready to go in minutes.Designed originally as rapid response boats for fire departments and rescue units, these unique aluminum roll up floors with an innovative hinge system and non-skid panels can perform a variety of functions. They are easy to store or carry and can be set up in minutes. The main air chambers are equipped with over pressure relief valves. They can be inflated either by compressed air bottles or the standard equipment foot pump. In addition to their Achilles CSM fabric and four-layer seam construction, other special features like abrasion wear patches and removable storage bags make them practical alternatives for tackling a range of jobs on the water. FRB Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Deep “V” inflatable keel
    • Aluminum roll-up floor with nonskid panels, fiberglass encased v-shaped transom with protective motor clamp plate
    • Two paddles with interior tie downs
    • Towing bridle D-rings
    • Two removable storage bags
    • Full-length splash guard with life lines
    • Abrasion patches
    • Five interior tie-down D-rings
    • Full-length teardrop rubbing strake
    • Foot pump and maintenance kit
    • The FRB-104 has two over pressure relief valves, four lift and carry handles, interior bow lifting D-ring and bailer valve. The FRB-124 has four over pressure relief valves, six lift and carry handles, two bailer valves and heavy duty bailer sleeve.
  • HB-240AL

    • Length 7'10" (240 cm)
    • Load Capacity 880 lbs (400 kg)
    • Person Capacity 3
    • Maximum H.P. 6 Standard

    HB-AL Series

    Rigid hull series

    Our aluminum hull ribs let you go anywhere. We’ve incorporated all the best features of our pacesetting HB fiberglass hull inflatable boats into the HB-AL series. These rugged boats feature a marine grade aluminum hull that is powder-coated to ensure a smooth, long lasting finish. They offer the advantage of being lightweight yet remark- ably strong and durable. A modified V hull, combined with their lightweight, allow HB-AL boats to cut through water efficiently with less horsepower. All three HB-AL boats are single hull models that keep the weight of the boats down. They also all have non-skid deck patches for better traction, safety and comfort. All of this is in addition to a host of other great features perfected by Achilles through our years as a leader in RIB design and inflatable boat technology. The HB-AL boats are a great choice for boaters who want a fuel-efficient and well-performing RIB that can handle rocky coastlines, coral, frequent beaching, and anything else you can throw at them. HB-AL Standard Features include:
    • Achilles CSM reinforced fabric
    • Four layer seam construction
    • Powder-coated aluminum hull with non-skid patches (HB-310AL has full deck liner)
    • Hull keel guard
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Interior oar straps (HB-310AL only)
    • Full-length teardrop rubbing strake
    • Towing bridle D-rings
    • Welded bow eye
    • Inside bow davit lifting eye
    • Stern mounted davit lifting eyes
    • Outside transom towing eyes
    • Protective transom motor clamp plate
    • Bow and stern carry handles
    • Webbed passenger handles and helmsman handles
    • Removable Aluminum rowing seat (gray painted)
    • Extra seat attachment patches (except the HB-240AL)
    • Bailer valve
    • Foot pump
    • Maintenance kit
  • HB-240LX

    • Length 7’10” (240 cm)
    • Load Capacity 900 lbs. (410 kg)
    • Person Capacity 3
    • Maximum H.P. 5 standard

    HB-LX Series

    Rigid hull series

    A lightweight rigid hull series packed with high performance features.The Achilles HB-LX boats provide the critically acclaimed performance of the Achilles DX deep “V” fiberglass hull design in a lighter RIB. They also have the same tube design as the DX series, yet a modification of the deck design and removing the bow locker results in a RIB that is on average 20% lighter than the same size DX model. This means they can perform well with smaller engines and can be carried or transported more easily. Despite their lighter weight and lower cost compared to the HB-DX series, they are still loaded with all the high quality standard features for which Achilles is known.   New Seat and Console Kits Now Available! We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options.   The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired.   The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION).   The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls.   HB-LX Standard Features include:
    • Pearl Gray Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Deep “V” fiberglass hull
    • Full-length teardrop rubbing strake
    • Removable wood rowing seat
    • D-rings for towing bridle
    • Stainless bow eye
    • Lifting hardware for davits
    • Webbed passenger, helmsman, and rear carry handles
    • Bow carry handle
    • Interior oar straps (except HB240-LX)
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Gas tank tie down hardware
    • Protective transom motor clamp plate
    • Extra seat attachment patches (except HB240-LX)
    • Bailer valve
    • Foot pump
    • Maintenance kit
  • HB-270AL

    • Length 8'10" (270 cm)
    • Load Capacity 990 lbs (450 kg)
    • Person Capacity 4
    • Maximum H.P. 8 Standard

    HB-AL Series

    Rigid hull series

    Our aluminum hull ribs let you go anywhere.We’ve incorporated all the best features of our pacesetting HB fiberglass hull inflatable boats into the HB-AL series. These rugged boats feature a marine grade aluminum hull that is powder-coated to ensure a smooth, long lasting finish. They offer the advantage of being lightweight yet remark- ably strong and durable. A modified V hull, combined with their lightweight, allow HB-AL boats to cut through water efficiently with less horsepower.All three HB-AL boats are single hull models that keep the weight of the boats down. They also all have non-skid deck patches for better traction, safety and comfort. All of this is in addition to a host of other great features perfected by Achilles through our years as a leader in RIB design and inflatable boat technology. The HB-AL boats are a great choice for boaters who want a fuel-efficient and well-performing RIB that can handle rocky coastlines, coral, frequent beaching, and anything else you can throw at them.  HB-AL Standard Features include:
    • Achilles CSM reinforced fabric
    • Four layer seam construction
    • Powder-coated aluminum hull with non-skid patches (HB-310AL has full deck liner)
    • Hull keel guard
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Interior oar straps (HB-310AL only)
    • Full-length teardrop rubbing strake
    • Towing bridle D-rings
    • Welded bow eye
    • Inside bow davit lifting eye
    • Stern mounted davit lifting eyes
    • Outside transom towing eyes
    • Protective transom motor clamp plate
    • Bow and stern carry handles
    • Webbed passenger handles and helmsman handles
    • Removable Aluminum rowing seat (gray painted)
    • Extra seat attachment patches (except the HB-240AL)
    • Bailer valve
    • Foot pump
    • Maintenance kit
  • HB-270AX

    • Length 8’10” (270 cm)
    • Load Capacity 990 lbs (450 kg)
    • Person Capacity 4
    • Maximum H.P. 10 Standard

    HB-AX Series

    Rigid hull series

    New HB-335AX Pro Commercial and Rescue RIB!The Achilles HB-AX aluminum hull series expands again in 2019 with the addition of the HB-335AX PRO. This new model is only available in red for increased visibility and is designed for heavy duty commercial and rescue use. It has a full length splashguard with lifelines, abrasion/wear patches on top of the tubes, and has a paddle in place of oars and oarlocks. Like all Achilles HB-AX models it features a tough, powder coated marine grade aluminum hull with a full length keel guard to stand up to frequent beachings, coral, rocks, and other rough surfaces. The double heavy-duty rubbing strake on all HB-AX models offers addition protection to the tubes from rocks, docks, and pilings. All HB-AX models also come with a vented bow locker large enough to accommodate a gas tank, and the ability to run a fuel line under the deck that enables you to free up deck space that is usually taken up by the fuel tank and fuel line. It also helps distribute weight more evenly by moving the gas tank forward. The flat deck with non-skid patches also offers better traction, safety, and comfort. This unique design also allows water to flow under the deck to keep your feet dry if any water gets into the boat. New Seat and Console Kits Now Available! We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options. The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired. The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION). The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls.   HB-AX Standard Features include:
    • Achilles CSM reinforced fabric
    • Four layer seam construction
    • Powder-coated aluminum hull with keel guard
    • Full length deck liner with non-skid patches
    • Bow locker
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Interior oar straps
    • Double heavy-duty full length teardrop rubbing strake
    • Towing bridle D-rings
    • Welded bow eye, inside bow davit lifting eye, stern mounted davit lifting eyes, outside transom towing eyes
    • Protective transom motor clamp plate
    • Molded bow and stern lift and carry handles
    • Webbed passenger handles and helmsman handles
    • Removable aluminum rowing seat
    • Extra seat attachment patches
    • Bailer valve
    • Foot pump
    • Maintenance kit
     
  • HB-270FX

    • Length 8’10” (270 cm)
    • Load Capacity 1010 lbs. (460 kg)
    • Person Capacity 4
    • Maximum H.P. 8 standard

    HB-FX Series

    Rigid hull series

    An innovative folding transom makes these lightweight RIBs the easiest to transport, carry, and launch. The Achilles HB-FX boats feature a unique folding transom, lightweight design, and full-length carry bag that combine to make these rigid hull models the easiest to transport and launch. Despite their lighter weight, both these popular FX models offer large load capacities and the ability to carry four people. The Achilles HB-FX series offers boaters the most convenient RIBs available.   HB-FX Standard Features include:
    • Pearl Gray Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Modified "V" fiberglass hull
    • Folding fiberglass transom
    • Full-length carry bag
    • Full-length teardrop rubbing strake
    • D-rings for towing bridle
    • Stainless steel bow eye
    • Inside bow davit lifting eye
    • Bow carry handle
    • Webbed passenger, helmsman, and rear carry handles
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Interior oar straps (HB-300FX only)
    • Gas tank tie down hardware
    • Protective transom motor clamp plate
    • Removable aluminum rowing seat
    • Extra seat attachment patches (HB-300FX only)
    • Bailer valve
    • Foot pump
    • Maintenance kit
  • HB-280DX

    • Length 9'2" (280 cm)
    • Load Capacity 1190 lbs. (540 kg)
    • Person Capacity 4
    • Maximum H.P. 15 standard

    HB-DX Series

    Rigid hull series

    These deluxe hard bottom inflatables offer boaters the best combination of style, performance and functionality. Sleek, Euro-style tubes give them a stylish edge over other RIB’s. A deep “V” fiberglass hull delivers superior performance while a built-in bow locker provides both a seat and a place for gear. If you want to take a step above the norm in a hard-bottomed tender, step up to an Achilles HB-DX RIB. Like every Achilles boat they are made with our own Achilles CSM fabric so they can handle the burning sun of the tropics or cold northern waters without fading or deteriorating. Choose a rigid-hulled inflatable that gives you a little extra. Choose an Achilles HB-DX. New Seat and Console Kits Now Available! We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options. The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired. The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION). The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls. HB-DX Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Deep “V” fiberglass hull
    • Bow locker
    • Double heavy-duty full-length teardrop rubbing strake
    • Extra seat attachment patches
    • Helmsman grip
    • Removable aluminum rowing seat (Except HB-385DX which has a wooden seat)
    • D-rings for towing bridle
    • Stainless bow eye
    • Lifting hardware for davits
    • Molded rubber bow handle, carry handles, and helmsman grip
    • Webbed passenger handles
    • Interior oar straps
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders (HB-385DX has paddle)
    • Gas tank tie down hardware
    • Protective transom motor clamp plate
    • Bailer valve
    • Foot pump
    • Maintenance kit
     
  • HB-280LX

    • Length 9’2” (280 cm)
    • Load Capacity 1210 lbs. (550 kg)
    • Person Capacity 4
    • Maximum H.P. 10 standard

    HB-LX Series

    Rigid hull series

    A lightweight rigid hull series packed with high performance features.The Achilles HB-LX boats provide the critically acclaimed performance of the Achilles DX deep “V” fiberglass hull design in a lighter RIB. They also have the same tube design as the DX series, yet a modification of the deck design and removing the bow locker results in a RIB that is on average 20% lighter than the same size DX model.This means they can perform well with smaller engines and can be carried or transported more easily. Despite their lighter weight and lower cost compared to the HB-DX series, they are still loaded with all the high quality standard features for which Achilles is known.   New Seat and Console Kits Now Available! We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options.   The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired.   The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION).   The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls.   HB-LX Standard Features include:
    • Pearl Gray Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Deep “V” fiberglass hull
    • Full-length teardrop rubbing strake
    • Removable wood rowing seat
    • D-rings for towing bridle
    • Stainless bow eye
    • Lifting hardware for davits
    • Webbed passenger, helmsman, and rear carry handles
    • Bow carry handle
    • Interior oar straps (except HB240-LX)
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Gas tank tie down hardware
    • Protective transom motor clamp plate
    • Extra seat attachment patches (except HB240-LX)
    • Bailer valve
    • Foot pump
    • Maintenance kit
  • HB 300FX

    • Length 9’10” (300 cm)
    • Load Capacity 1260 lbs. (570 kg)
    • Person Capacity 4
    • Maximum H.P. 10 standard

    HB-FX Series

    Rigid hull series

    An innovative folding transom makes these lightweight RIBs the easiest to transport, carry, and launch. The Achilles HB-FX boats feature a unique folding transom, lightweight design, and full-length carry bag that combine to make these rigid hull models the easiest to transport and launch. Despite their lighter weight, both these popular FX models offer large load capacities and the ability to carry four people. The Achilles HB-FX series offers boaters the most convenient RIBs available.   HB-FX Standard Features include:
    • Pearl Gray Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Modified "V" fiberglass hull
    • Folding fiberglass transom
    • Full-length carry bag
    • Full-length teardrop rubbing strake
    • D-rings for towing bridle
    • Stainless steel bow eye
    • Inside bow davit lifting eye
    • Bow carry handle
    • Webbed passenger, helmsman, and rear carry handles
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Interior oar straps (HB-300FX only)
    • Gas tank tie down hardware
    • Protective transom motor clamp plate
    • Removable aluminum rowing seat
    • Extra seat attachment patches (HB-300FX only)
    • Bailer valve
    • Foot pump
    • Maintenance kit

    HB-FX Series

    Rigid hull series

    An innovative folding transom makes these lightweight RIBs the easiest to transport, carry, and launch.The Achilles HB-FX boats feature a unique folding transom, lightweight design, and full-length carry bag that combine to make these rigid hull models the easiest to transport and launch. Despite their lighter weight, both these popular FX models offer large load capacities and the ability to carry four people. The Achilles HB-FX series offers boaters the most convenient RIBs available.  HB-FX Standard Features include:
    • Pearl Gray Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Modified "V" fiberglass hull
    • Folding fiberglass transom
    • Full-length carry bag
    • Full-length teardrop rubbing strake
    • D-rings for towing bridle
    • Stainless steel bow eye
    • Inside bow davit lifting eye
    • Bow carry handle
    • Webbed passenger, helmsman, and rear carry handles
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Interior oar straps (HB-300FX only)
    • Gas tank tie down hardware
    • Protective transom motor clamp plate
    • Removable aluminum rowing seat
    • Extra seat attachment patches (HB-300FX only)
    • Bailer valve
    • Foot pump
    • Maintenance kit
  • HB-310AL

    • Length 10'2" (310 cm)
    • Load Capacity 1190 lbs. (540 kg)
    • Person Capacity 4
    • Maximum H.P. 15 standard

    HB-AL Series

    Rigid hull series

    Our aluminum hull ribs let you go anywhere.We’ve incorporated all the best features of our pacesetting HB fiberglass hull inflatable boats into the HB-AL series. These rugged boats feature a marine grade aluminum hull that is powder-coated to ensure a smooth, long lasting finish. They offer the advantage of being lightweight yet remark- ably strong and durable. A modified V hull, combined with their lightweight, allow HB-AL boats to cut through water efficiently with less horsepower. All three HB-AL boats are single hull models that keep the weight of the boats down. They also all have non-skid deck patches for better traction, safety and comfort. All of this is in addition to a host of other great features perfected by Achilles through our years as a leader in RIB design and inflatable boat technology. The HB-AL boats are a great choice for boaters who want a fuel-efficient and well-performing RIB that can handle rocky coastlines, coral, frequent beaching, and anything else you can throw at them. HB-AL Standard Features include:
    • Achilles CSM reinforced fabric
    • Four layer seam construction
    • Powder-coated aluminum hull with non-skid patches (HB-310AL has full deck liner)
    • Hull keel guard
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Interior oar straps (HB-310AL only)
    • Full-length teardrop rubbing strake
    • Towing bridle D-rings
    • Welded bow eye
    • Inside bow davit lifting eye
    • Stern mounted davit lifting eyes
    • Outside transom towing eyes
    • Protective transom motor clamp plate
    • Bow and stern carry handles
    • Webbed passenger handles and helmsman handles
    • Removable Aluminum rowing seat (gray painted)
    • Extra seat attachment patches (except the HB-240AL)
    • Bailer valve
    • Foot pump
    • Maintenance kit
  • HB-310AX

    • Length 10' 2" (310 cm)
    • Load Capacity 1120 lbs (510 kg)
    • Person Capacity 4
    • Maximum H.P. 20 Standard

    HB-AX Series

    Rigid hull series

    New HB-335AX Pro Commercial and Rescue RIB!The Achilles HB-AX aluminum hull series expands again in 2019 with the addition of the HB-335AX PRO. This new model is only available in red for increased visibility and is designed for heavy duty commercial and rescue use. It has a full length splashguard with lifelines, abrasion/wear patches on top of the tubes, and has a paddle in place of oars and oarlocks. Like all Achilles HB-AX models it features a tough, powder coated marine grade aluminum hull with a full length keel guard to stand up to frequent beachings, coral, rocks, and other rough surfaces. The double heavy-duty rubbing strake on all HB-AX models offers addition protection to the tubes from rocks, docks, and pilings. All HB-AX models also come with a vented bow locker large enough to accommodate a gas tank, and the ability to run a fuel line under the deck that enables you to free up deck space that is usually taken up by the fuel tank and fuel line. It also helps distribute weight more evenly by moving the gas tank forward. The flat deck with non-skid patches also offers better traction, safety, and comfort. This unique design also allows water to flow under the deck to keep your feet dry if any water gets into the boat.New Seat and Console Kits Now Available! We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options. The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired. The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION). The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls.   HB-AX Standard Features include:
    • Achilles CSM reinforced fabric
    • Four layer seam construction
    • Powder-coated aluminum hull with keel guard
    • Full length deck liner with non-skid patches
    • Bow locker
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Interior oar straps
    • Double heavy-duty full length teardrop rubbing strake
    • Towing bridle D-rings
    • Welded bow eye, inside bow davit lifting eye, stern mounted davit lifting eyes, outside transom towing eyes
    • Protective transom motor clamp plate
    • Molded bow and stern lift and carry handles
    • Webbed passenger handles and helmsman handles
    • Removable aluminum rowing seat
    • Extra seat attachment patches
    • Bailer valve
    • Foot pump
    • Maintenance kit
     
  • HB-315DX

    • Length 10'4" (315 cm)
    • Load Capacity 1300 lbs. (590 kg)
    • Person Capacity 5
    • Maximum H.P. 20 standard

    HB-DX Series

    Rigid hull series

    These deluxe hard bottom inflatables offer boaters the best combination of style, performance and functionality.Sleek, Euro-style tubes give them a stylish edge over other RIB’s. A deep “V” fiberglass hull delivers superior performance while a built-in bow locker provides both a seat and a place for gear. If you want to take a step above the norm in a hard-bottomed tender, step up to an Achilles HB-DX RIB. Like every Achilles boat they are made with our own Achilles CSM fabric so they can handle the burning sun of the tropics or cold northern waters without fading or deteriorating. Choose a rigid-hulled inflatable that gives you a little extra. Choose an Achilles HB-DX. New Seat and Console Kits Now Available! We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options. The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired. The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION). The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls. HB-DX Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Deep “V” fiberglass hull
    • Bow locker
    • Double heavy-duty full-length teardrop rubbing strake
    • Extra seat attachment patches
    • Helmsman grip
    • Removable aluminum rowing seat (Except HB-385DX which has a wooden seat)
    • D-rings for towing bridle
    • Stainless bow eye
    • Lifting hardware for davits
    • Molded rubber bow handle, carry handles, and helmsman grip
    • Webbed passenger handles
    • Interior oar straps
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders (HB-385DX has paddle)
    • Gas tank tie down hardware
    • Protective transom motor clamp plate
    • Bailer valve
    • Foot pump
    • Maintenance kit
     
  • HB-315LX

    • Length 10'4" (315 cm)
    • Load Capacity 1320 lbs. (600 kg)
    • Person Capacity 5
    • Maximum H.P. 15 standard
     

    HB-LX Series

    Rigid hull series

    A lightweight rigid hull series packed with high performance features.The Achilles HB-LX boats provide the critically acclaimed performance of the Achilles DX deep “V” fiberglass hull design in a lighter RIB. They also have the same tube design as the DX series, yet a modification of the deck design and removing the bow locker results in a RIB that is on average 20% lighter than the same size DX model.This means they can perform well with smaller engines and can be carried or transported more easily. Despite their lighter weight and lower cost compared to the HB-DX series, they are still loaded with all the high quality standard features for which Achilles is known.  New Seat and Console Kits Now Available! We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options.   The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired.   The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION).   The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls.   HB-LX Standard Features include:
    • Pearl Gray Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Deep “V” fiberglass hull
    • Full-length teardrop rubbing strake
    • Removable wood rowing seat
    • D-rings for towing bridle
    • Stainless bow eye
    • Lifting hardware for davits
    • Webbed passenger, helmsman, and rear carry handles
    • Bow carry handle
    • Interior oar straps (except HB240-LX)
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Gas tank tie down hardware
    • Protective transom motor clamp plate
    • Extra seat attachment patches (except HB240-LX)
    • Bailer valve
    • Foot pump
    • Maintenance kit
  • HB-335AX

    • Length 11' 0" (335 cm)
    • Load Capacity 1210 lbs (550 kg)
    • Person Capacity 5
    • Maximum H.P. 25 Standard

    HB-AX Series

    Rigid hull series

    New HB-335AX Pro Commercial and Rescue RIB!The Achilles HB-AX aluminum hull series expands again in 2019 with the addition of the HB-335AX PRO. This new model is only available in red for increased visibility and is designed for heavy duty commercial and rescue use. It has a full length splashguard with lifelines, abrasion/wear patches on top of the tubes, and has a paddle in place of oars and oarlocks. Like all Achilles HB-AX models it features a tough, powder coated marine grade aluminum hull with a full length keel guard to stand up to frequent beachings, coral, rocks, and other rough surfaces. The double heavy-duty rubbing strake on all HB-AX models offers addition protection to the tubes from rocks, docks, and pilings. All HB-AX models also come with a vented bow locker large enough to accommodate a gas tank, and the ability to run a fuel line under the deck that enables you to free up deck space that is usually taken up by the fuel tank and fuel line. It also helps distribute weight more evenly by moving the gas tank forward. The flat deck with non-skid patches also offers better traction, safety, and comfort. This unique design also allows water to flow under the deck to keep your feet dry if any water gets into the boat.New Seat and Console Kits Now Available!We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options. The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired. The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION). The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls.   HB-AX Standard Features include:
    • Achilles CSM reinforced fabric
    • Four layer seam construction
    • Powder-coated aluminum hull with keel guard
    • Full length deck liner with non-skid patches
    • Bow locker
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Interior oar straps
    • Double heavy-duty full length teardrop rubbing strake
    • Towing bridle D-rings
    • Welded bow eye, inside bow davit lifting eye, stern mounted davit lifting eyes, outside transom towing eyes
    • Protective transom motor clamp plate
    • Molded bow and stern lift and carry handles
    • Webbed passenger handles and helmsman handles
    • Removable aluminum rowing seat
    • Extra seat attachment patches
    • Bailer valve
    • Foot pump
    • Maintenance kit
     
  • HB-335AX-PRO

    • Length 11’0“ (335 cm)
    • Load Capacity 1210 lbs (550 kg)
    • Person Capacity 5
    • Maximum H.P. 25 Standard

    HB-AX Series

    Rigid hull series

    New HB-335AX Pro Commercial and Rescue RIB!The Achilles HB-AX aluminum hull series expands again in 2019 with the addition of the HB-335AX PRO. This new model is only available in red for increased visibility and is designed for heavy duty commercial and rescue use. It has a full length splashguard with lifelines, abrasion/wear patches on top of the tubes, and has a paddle in place of oars and oarlocks. Like all Achilles HB-AX models it features a tough, powder coated marine grade aluminum hull with a full length keel guard to stand up to frequent beachings, coral, rocks, and other rough surfaces. The double heavy-duty rubbing strake on all HB-AX models offers addition protection to the tubes from rocks, docks, and pilings. All HB-AX models also come with a vented bow locker large enough to accommodate a gas tank, and the ability to run a fuel line under the deck that enables you to free up deck space that is usually taken up by the fuel tank and fuel line. It also helps distribute weight more evenly by moving the gas tank forward. The flat deck with non-skid patches also offers better traction, safety, and comfort. This unique design also allows water to flow under the deck to keep your feet dry if any water gets into the boat.New Seat and Console Kits Now Available!We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options.The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired. The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION). The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls. HB-335AX PRO Standard Features include:
    • Achilles CSM reinforced fabric
    • Four layer seam construction
    • Powder-coated aluminum hull with full length keel guard
    • Full length deck liner with non-skid patches
    • Vented bow locker
    • Paddle with interior paddle strap;
    • Double heavy-duty full length teardrop rubbing strake
    • Towing bridle D-rings
    • Welded bow eye, inside bow davit lifting eyes, stern mounted davit lifting eyes, outside transom towing eyes
    • Protective transom motor clamp plate
    • 5 molded lift and carry handles
    • Full length splashguard with lifeliness
    • Seat or gear bag attachment patches
    • Extra seat attachment patches
    • Bailer valve
    • Foot pump
    • Maintenance kit
  • HB-350LX

    • Length 11’6” (350 cm)
    • Load Capacity 1680 lbs. (760 kg)
    • Person Capacity 6
    • Maximum H.P. 20 standard

    HB-LX Series

    Rigid hull series

    A lightweight rigid hull series packed with high performance features.The Achilles HB-LX boats provide the critically acclaimed performance of the Achilles DX deep “V” fiberglass hull design in a lighter RIB. They also have the same tube design as the DX series, yet a modification of the deck design and removing the bow locker results in a RIB that is on average 20% lighter than the same size DX model.This means they can perform well with smaller engines and can be carried or transported more easily. Despite their lighter weight and lower cost compared to the HB-DX series, they are still loaded with all the high quality standard features for which Achilles is known.New Seat and Console Kits Now Available! We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options.   The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired.   The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION).   The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls.   HB-LX Standard Features include:
    • Pearl Gray Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Deep “V” fiberglass hull
    • Full-length teardrop rubbing strake
    • Removable wood rowing seat
    • D-rings for towing bridle
    • Stainless bow eye
    • Lifting hardware for davits
    • Webbed passenger, helmsman, and rear carry handles
    • Bow carry handle
    • Interior oar straps (except HB240-LX)
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Gas tank tie down hardware
    • Protective transom motor clamp plate
    • Extra seat attachment patches (except HB240-LX)
    • Bailer valve
    • Foot pump
    • Maintenance kit
  • HB-385DX

    • Length 12'8" (385 cm)
    • Load Capacity 1790 lbs. (810 kg)
    • Person Capacity 7
    • Maximum H.P. 40 long

    HB-DX Series

    Rigid hull series

    These deluxe hard bottom inflatables offer boaters the best combination of style, performance and functionality.Sleek, Euro-style tubes give them a stylish edge over other RIB’s. A deep “V” fiberglass hull delivers superior performance while a built-in bow locker provides both a seat and a place for gear. If you want to take a step above the norm in a hard-bottomed tender, step up to an Achilles HB-DX RIB. Like every Achilles boat they are made with our own Achilles CSM fabric so they can handle the burning sun of the tropics or cold northern waters without fading or deteriorating. Choose a rigid-hulled inflatable that gives you a little extra. Choose an Achilles HB-DX.New Seat and Console Kits Now Available!We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options. The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired. The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION). The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls. HB-DX Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Deep “V” fiberglass hull
    • Bow locker
    • Double heavy-duty full-length teardrop rubbing strake
    • Extra seat attachment patches
    • Helmsman grip
    • Removable aluminum rowing seat (Except HB-385DX which has a wooden seat)
    • D-rings for towing bridle
    • Stainless bow eye
    • Lifting hardware for davits
    • Molded rubber bow handle, carry handles, and helmsman grip
    • Webbed passenger handles
    • Interior oar straps
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders (HB-385DX has paddle)
    • Gas tank tie down hardware
    • Protective transom motor clamp plate
    • Bailer valve
    • Foot pump
    • Maintenance kit
     
  • LEX-77

    • Length 7'7" (230 cm)
    • Load Capacity 730 lbs. (330 kg)
    • Person Capacity 2
    • Maximum H.P. 4 standard

    LEX Series

    Sport tender series

    These timeless tenders still offer boaters the classic inflatable look and functionality that has made them so popular. LEX boats represent the culmination of many subtle refinements over the years that have kept them current while maintaining their traditional appearance. A sleek bow design and ample interior space come together in this classic tender. A teardrop rub strake deflects spray and improves protection from the inevitable collisions with docks and boat hulls. Additional features include a painted wood seat and a full sectional wood floor. They all add up to a solid, reliable tender that combines practicality and performance in an economical package.   LEX Standard Features include:
    • Achilles CSM reinforced fabric
    • Four layer seam construction
    • Air keel
    • Wood floorboards
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Full-length teardrop rubbing strake
    • Removable wood rowing seat
    • Foot pump
    • Towing bridle D-rings
    • Protective transom motor clamp plate
    • Life lines
    • Bailer valve
    • Carry bag
    • Maintenance kit.
  • LEX-88

    • Length 8'8" (265 cm)
    • Load Capacity 900 lbs. (410 kg)
    • Person Capacity 4*
    • Maximum H.P. 6 standard

    LEX Series

    Sport tender series

    These timeless tenders still offer boaters the classic inflatable look and functionality that has made them so popular.LEX boats represent the culmination of many subtle refinements over the years that have kept them current while maintaining their traditional appearance. A sleek bow design and ample interior space come together in this classic tender. A teardrop rub strake deflects spray and improves protection from the inevitable collisions with docks and boat hulls. Additional features include a painted wood seat and a full sectional wood floor. They all add up to a solid, reliable tender that combines practicality and performance in an economical package. LEX Standard Features include:
    • Achilles CSM reinforced fabric
    • Four layer seam construction
    • Air keel
    • Wood floorboards
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Full-length teardrop rubbing strake
    • Removable wood rowing seat
    • Foot pump
    • Towing bridle D-rings
    • Protective transom motor clamp plate
    • Life lines
    • Bailer valve
    • Carry bag
    • Maintenance kit.
  • LS2-RU

    • Length 7'6" (228 cm)
    • Load Capacity 620 lbs. (280 kg)
    • Person Capacity 2
    • Maximum H.P. 4 standard

    LS-RU Series

    Roll-up tender series

    Unsurpassed convenience of a lightweight, roll-up tender. Both our LS-RU rollup tenders can be stowed in a space just 10" high. With a roll-up wood/Achilles CSM fabric floor and solid transom, they can be inflated and ready to go in minutes. When they are, they deliver surprisingly large load and person capacities. Easy to carry, easy to set up, easy to store – the LS-RU. LS-RU Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Wood/CSM roll-up floor
    • Full-length rubbing strake
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Protective motor clamp plate
    • Removable wood rowing seat
    • Bailer valve
    • Life lines
    • Towing bridle D-rings
    • Foot pump
    • Carry bag
    • Maintenance kit
  • LSR-290E

    • Length 9'6" (290 cm)
    • Load Capacity 1100 lbs. (500 kg)
    • Person Capacity 4
    • Maximum H.P. 8 standard

    LSR-E Series

    Aluminum roll-up series

    Our Popular Aluminum Floor Rollups have been redesigned to look and perform even better! We’ve added a new, sleek lateral seam tube design to these super convenient boats that feature a unique aluminum rollup floor which makes it a snap to get them in and out of the water quickly and easily. This is combined with an inflatable keel and V-shaped fiberglass-encased transom to enhance performance. Large 17” tubes allow the LSR tenders to carry heavy loads. Add in the improved buoyancy, extra load capacity and smoother planing provided by the Performax end cone design, and you have a roll-up tender that is tough to beat. LSR Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Air keel
    • Aluminum roll-up floor
    • Fiberglass encased v-shaped transom
    • Full-length teardrop rubbing strake
    • Bow carry handle
    • Interior bow lifting D-ring
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Towing bridle D-rings
    • Removable aluminum rowing seat
    • Extra seat attachment patches
    • Webbed passenger, helmsman, and rear carry handles
    • Protective motor clamp plate
    • Bailer valve
    • Foot pump
    • Carry bag
    • Maintenance kit
  • LSR-310E

    • Length 10'2" (310 cm)
    • Load Capacity 1190 lbs. (540 kg)
    • Person Capacity 4
    • Maximum H.P. 10 standard

    LSR-E Series

    Aluminum roll-up series

    Our Popular Aluminum Floor Rollups have been redesigned to look and perform even better!We’ve added a new, sleek lateral seam tube design to these super convenient boats that feature a unique aluminum rollup floor which makes it a snap to get them in and out of the water quickly and easily. This is combined with an inflatable keel and V-shaped fiberglass-encased transom to enhance performance. Large 17” tubes allow the LSR tenders to carry heavy loads. Add in the improved buoyancy, extra load capacity and smoother planing provided by the Performax end cone design, and you have a roll-up tender that is tough to beat. LSR Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Air keel
    • Aluminum roll-up floor
    • Fiberglass encased v-shaped transom
    • Full-length teardrop rubbing strake
    • Bow carry handle
    • Interior bow lifting D-ring
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Towing bridle D-rings
    • Removable aluminum rowing seat
    • Extra seat attachment patches
    • Webbed passenger, helmsman, and rear carry handles
    • Protective motor clamp plate
    • Bailer valve
    • Foot pump
    • Carry bag
    • Maintenance kit
  • LT-2

    • Length 7’3” (220 cm)
    • Load Capacity 640 lbs. (290 kg)
    • Person Capacity 2
    • Maximum H.P. 3 standard

    LT Series

    Dinghy series

    A lot of quality in a compact package. These two and four-person boats go from their handy carry bags to fully equipped dinghies in just minutes. Compact enough to be stored virtually anywhere, they are safe, durable and dependable dinghies capable of carrying substantial loads. They come fully equipped with fold-down oar system, wood seat, fold-up floor and motor mount. Even though they are our most economical boats, they are made with the same durable Achilles CSM fabric and four-layer seam construction, and backed by the same five-year warranty as our large sport boats. LT Standard features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Wood/ Achilles CSM roll-up floor (LT4)
    • Hinged wood floor (LT2)
    • Full-length rubbing strake
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Bow D-ring (LT2)
    • Towing bridle D-rings (LT4)
    • Life lines with hand loops
    • Removable wood rowing seat
    • Motor mount
    • Foot pump
    • Carry bag
    • Maintenance kit
  • LT-4

    • Length 8’6” (260 cm)
    • Load Capacity 970 lbs. (440 kg)
    • Person Capacity 4*
    • Maximum H.P. 3 standard

    LT Series

    Dinghy series

    A lot of quality in a compact package.These two and four-person boats go from their handy carry bags to fully equipped dinghies in just minutes. Compact enough to be stored virtually anywhere, they are safe, durable and dependable dinghies capable of carrying substantial loads. They come fully equipped with fold-down oar system, wood seat, fold-up floor and motor mount. Even though they are our most economical boats, they are made with the same durable Achilles CSM fabric and four-layer seam construction, and backed by the same five-year warranty as our large sport boats. LT Standard features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Wood/ Achilles CSM roll-up floor (LT4)
    • Hinged wood floor (LT2)
    • Full-length rubbing strake
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Bow D-ring (LT2)
    • Towing bridle D-rings (LT4)
    • Life lines with hand loops
    • Removable wood rowing seat
    • Motor mount
    • Foot pump
    • Carry bag
    • Maintenance kit
  • SG-124

    • Length 12'4" (375 cm)
    • Load Capacity 1460 lbs. (660 kg)
    • Person Capacity 5
    • Maximum H.P. 35 standard

    SG Series

    Sport utility series

    These "top-of-the-line" models continue to set the standard for inflatable sport boats. Achilles SG boats offer a roomy, square bow configuration which provides room for extra gear, and an aluminum and fiberglass floor system* which delivers superior rigidity and durability. Achilles SG Sport boats bring performance and practicality together for better diving, fishing, or all-around sport boating pleasure. They are also perennial rescue and emergency boat favorites of fire departments, first responders and others around the world. New for 2017! Our newest addition to the SG Sport Utility series is the SG-140SV. This new model shares most of the same standard features and specifications as our traditional SG-140 model, but incorporates intercommunicating valves and over-pressure relief valves in all the main air tube chambers. These additions give the end user the ability to inflate the entire boat (except for the keel) from a single inflation point using an SCBA or SCUBA compressed air bottle or tank. It also allows for each chamber to be isolated in the event of damage to one of the chambers. This new inflation system is completely internal so there are no external hoses or hardware to get in the way. Although this is our first offering in the SG-SV series, we anticipate additional features and sizes to be added in the future. Currently available in Black only. SG Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Air keel
    • Aluminum and fiberglass* floorboards with aluminum stringer system
    • Fiberglass encased transom with protective motor clamp plate
    • Fuel tank tie-downs
    • Two bailer valves
    • Full-length teardrop rubbing strake
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders (except SG-156)
    • Bow carry handle
    • Lift and carry handles
    • Towing bridle D-rings
    • Helmsman grip
    • Full-length splash guard with lifelines
    • Removable wood seat (except SG-156)
    • Extra seat attachment patches
    • Large, high-volume foot pump
    • Double carry bag system
    • Maintenance kit
  • SG-140

    • Length 14'0" (425 cm)
    • Load Capacity 1940 lbs. (880 kg)
    • Person Capacity 6
    • Maximum H.P. 50 long

    SG Series

    Sport utility series

    These "top-of-the-line" models continue to set the standard for inflatable sport boats.Achilles SG boats offer a roomy, square bow configuration which provides room for extra gear, and an aluminum and fiberglass floor system* which delivers superior rigidity and durability. Achilles SG Sport boats bring performance and practicality together for better diving, fishing, or all-around sport boating pleasure. They are also perennial rescue and emergency boat favorites of fire departments, first responders and others around the world. New for 2017! Our newest addition to the SG Sport Utility series is the SG-140SV. This new model shares most of the same standard features and specifications as our traditional SG-140 model, but incorporates intercommunicating valves and over-pressure relief valves in all the main air tube chambers. These additions give the end user the ability to inflate the entire boat (except for the keel) from a single inflation point using an SCBA or SCUBA compressed air bottle or tank. It also allows for each chamber to be isolated in the event of damage to one of the chambers. This new inflation system is completely internal so there are no external hoses or hardware to get in the way. Although this is our first offering in the SG-SV series, we anticipate additional features and sizes to be added in the future. Currently available in Black only. SG Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Air keel
    • Aluminum and fiberglass* floorboards with aluminum stringer system
    • Fiberglass encased transom with protective motor clamp plate
    • Fuel tank tie-downs
    • Two bailer valves
    • Full-length teardrop rubbing strake
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders (except SG-156)
    • Bow carry handle
    • Lift and carry handles
    • Towing bridle D-rings
    • Helmsman grip
    • Full-length splash guard with lifelines
    • Removable wood seat (except SG-156)
    • Extra seat attachment patches
    • Large, high-volume foot pump
    • Double carry bag system
    • Maintenance kit
  • SG-140SV

    • Length 14'0" (425 cm)
    • Load Capacity 1940 lbs. (880 kg)
    • Person Capacity 6
    • Maximum H.P. 50 long

    SG Series

    Sport utility series

    These "top-of-the-line" models continue to set the standard for inflatable sport boats.Achilles SG boats offer a roomy, square bow configuration which provides room for extra gear, and an aluminum and fiberglass floor system* which delivers superior rigidity and durability. Achilles SG Sport boats bring performance and practicality together for better diving, fishing, or all-around sport boating pleasure. They are also perennial rescue and emergency boat favorites of fire departments, first responders and others around the world.New for 2017! Our newest addition to the SG Sport Utility series is the SG-140SV. This new model shares most of the same standard features and specifications as our traditional SG-140 model, but incorporates intercommunicating valves and over-pressure relief valves in all the main air tube chambers. These additions give the end user the ability to inflate the entire boat (except for the keel) from a single inflation point using an SCBA or SCUBA compressed air bottle or tank. It also allows for each chamber to be isolated in the event of damage to one of the chambers. This new inflation system is completely internal so there are no external hoses or hardware to get in the way. Although this is our first offering in the SG-SV series, we anticipate additional features and sizes to be added in the future. Currently available in Black only. SG Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Air keel
    • Aluminum and fiberglass* floorboards with aluminum stringer system
    • Fiberglass encased transom with protective motor clamp plate
    • Fuel tank tie-downs
    • Two bailer valves
    • Full-length teardrop rubbing strake
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders (except SG-156)
    • Bow carry handle
    • Lift and carry handles
    • Towing bridle D-rings
    • Helmsman grip
    • Full-length splash guard with lifelines
    • Removable wood seat (except SG-156)
    • Extra seat attachment patches
    • Large, high-volume foot pump
    • Double carry bag system
    • Maintenance kit
  • SG-156

    • Length 15'6" (473 cm)
    • Load Capacity 2800 lbs. (1270 kg)
    • Person Capacity 8
    • Maximum H.P. 55 long

    SG Series

    Sport utility series

    These "top-of-the-line" models continue to set the standard for inflatable sport boats.Achilles SG boats offer a roomy, square bow configuration which provides room for extra gear, and an aluminum and fiberglass floor system* which delivers superior rigidity and durability. Achilles SG Sport boats bring performance and practicality together for better diving, fishing, or all-around sport boating pleasure. They are also perennial rescue and emergency boat favorites of fire departments, first responders and others around the world.New for 2017!Our newest addition to the SG Sport Utility series is the SG-140SV. This new model shares most of the same standard features and specifications as our traditional SG-140 model, but incorporates intercommunicating valves and over-pressure relief valves in all the main air tube chambers. These additions give the end user the ability to inflate the entire boat (except for the keel) from a single inflation point using an SCBA or SCUBA compressed air bottle or tank. It also allows for each chamber to be isolated in the event of damage to one of the chambers. This new inflation system is completely internal so there are no external hoses or hardware to get in the way. Although this is our first offering in the SG-SV series, we anticipate additional features and sizes to be added in the future. Currently available in Black only. SG Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Air keel
    • Aluminum and fiberglass* floorboards with aluminum stringer system
    • Fiberglass encased transom with protective motor clamp plate
    • Fuel tank tie-downs
    • Two bailer valves
    • Full-length teardrop rubbing strake
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders (except SG-156)
    • Bow carry handle
    • Lift and carry handles
    • Towing bridle D-rings
    • Helmsman grip
    • Full-length splash guard with lifelines
    • Removable wood seat (except SG-156)
    • Extra seat attachment patches
    • Large, high-volume foot pump
    • Double carry bag system
    • Maintenance kit
  • SGX-122

    • Length 12’2” (365 cm)
    • Load Capacity 1520 lbs. (690 kg)
    • Person Capacity 6
    • Maximum H.P. 35 standard

    SGX Series

    Sport utility series

    These versatile aluminum and wood-floored boats are the perfect solution for a range of uses. They are rugged and roomy so they can be put to the test as dive boats, heavy duty tenders or utility boats. Their sporty nature also makes them great runabouts that really perform thanks to their deep “V” inflatable keel and large tube diameters. A range of quality features include a v-shaped fiberglass-encased transom and removable, dual position wood seat. Their Achilles CSM fabric and four-layer seam construction make these sport boats extremely tough... and tough to beat. SGX Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Aluminum and wood floorboards with aluminum stringer system
    • V-shaped fiberglass encased transom
    • Full-length teardrop rubbing strake
    • Deep “V” inflatable keel
    • Towing bridle D-rings
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Bow handle
    • Four lift and carry handles
    • Helmsman grip
    • Two bailer valves
    • Gas tank tie downs
    • Lifelines
    • Removable wood seat
    • Extra seat attachment patches
    • High-volume foot pump
    • Two carry bags
    • Maintenance kit
  • SGX-132

    • Length 13’2” (400 cm)
    • Load Capacity 1760 lbs. (800 kg)
    • Person Capacity 6
    • Maximum H.P. 40 long

    SGX Series

    Sport utility series

    These versatile aluminum and wood-floored boats are the perfect solution for a range of uses.They are rugged and roomy so they can be put to the test as dive boats, heavy duty tenders or utility boats. Their sporty nature also makes them great runabouts that really perform thanks to their deep “V” inflatable keel and large tube diameters.A range of quality features include a v-shaped fiberglass-encased transom and removable, dual position wood seat. Their Achilles CSM fabric and four-layer seam construction make these sport boats extremely tough... and tough to beat. SGX Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Aluminum and wood floorboards with aluminum stringer system
    • V-shaped fiberglass encased transom
    • Full-length teardrop rubbing strake
    • Deep “V” inflatable keel
    • Towing bridle D-rings
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Bow handle
    • Four lift and carry handles
    • Helmsman grip
    • Two bailer valves
    • Gas tank tie downs
    • Lifelines
    • Removable wood seat
    • Extra seat attachment patches
    • High-volume foot pump
    • Two carry bags
    • Maintenance kit
  • SPD-290E

    • Length 9'6" (290 cm)
    • Load Capacity 1100 lbs. (500 kg)
    • Person Capacity 4
    • Maximum H.P. 8 standard

    SPD-E Series

    Sport tender series

    This longtime lineup staple is now better than ever. We have never stopped making our SPD boats better which is why they have remained popular with boaters for so long. That commitment to innovation and improvement has continued with tube and floor design enhancements. New lateral seam tube construction gives these classic inflatables a more modern, stylish design. Rope life-lines have been replaced with webbed handles and helmsman grip for a cleaner appearance. The three rear floorboards that bear the brunt of abuse are now aluminum to decrease maintenance and increase durability. The classic features that make these boats so desirable remain such as large diameter tubes for greater load capacity and better performance, a removable aluminum rowing seat and an air keel/floor joint system that deliver a more rigid floor. SPD Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Aluminum and wood floorboards
    • Aluminum stringers and floorboard joints
    • Air keel
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Bow handle and towing D-rings
    • Interior bow lifting D-ring
    • Removable aluminum rowing seat
    • Extra seat attachment patches
    • Webbed passenger, helmsman, and rear carry handles
    • Extra seat attachment patches
    • Full length teardrop rubbing strake
    • Fiberglass coated v-shaped transom
    • Bailer valve
    • Foot pump
    • Carry bag (2 bags for the SPD-330E)
    • Maintenance kit
  • SPD-310E

    • Length 10'2" (310 cm)
    • Load Capacity 1190 lbs. (540 kg)
    • Person Capacity 4
    • Maximum H.P. 10 standard

    SPD-E Series

    Sport tender series

    This longtime lineup staple is now better than ever.We have never stopped making our SPD boats better which is why they have remained popular with boaters for so long. That commitment to innovation and improvement has continued with tube and floor design enhancements. New lateral seam tube construction gives these classic inflatables a more modern, stylish design. Rope life-lines have been replaced with webbed handles and helmsman grip for a cleaner appearance. The three rear floorboards that bear the brunt of abuse are now aluminum to decrease maintenance and increase durability. The classic features that make these boats so desirable remain such as large diameter tubes for greater load capacity and better performance, a removable aluminum rowing seat and an air keel/floor joint system that deliver a more rigid floor. SPD Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Aluminum and wood floorboards
    • Aluminum stringers and floorboard joints
    • Air keel
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Bow handle and towing D-rings
    • Interior bow lifting D-ring
    • Removable aluminum rowing seat
    • Extra seat attachment patches
    • Webbed passenger, helmsman, and rear carry handles
    • Extra seat attachment patches
    • Full length teardrop rubbing strake
    • Fiberglass coated v-shaped transom
    • Bailer valve
    • Foot pump
    • Carry bag (2 bags for the SPD-330E)
    • Maintenance kit
  • SPD-330E

    • Length 10'8" (325 cm)
    • Load Capacity 1300 lbs (590 kg)
    • Person Capacity 5
    • Maximum H.P. 20 standard

    SPD-E Series

    Sport tender series

    This longtime lineup staple is now better than ever.We have never stopped making our SPD boats better which is why they have remained popular with boaters for so long. That commitment to innovation and improvement has continued with tube and floor design enhancements. New lateral seam tube construction gives these classic inflatables a more modern, stylish design. Rope life-lines have been replaced with webbed handles and helmsman grip for a cleaner appearance. The three rear floorboards that bear the brunt of abuse are now aluminum to decrease maintenance and increase durability.The classic features that make these boats so desirable remain such as large diameter tubes for greater load capacity and better performance, a removable aluminum rowing seat and an air keel/floor joint system that deliver a more rigid floor. SPD Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Aluminum and wood floorboards
    • Aluminum stringers and floorboard joints
    • Air keel
    • Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders
    • Bow handle and towing D-rings
    • Interior bow lifting D-ring
    • Removable aluminum rowing seat
    • Extra seat attachment patches
    • Webbed passenger, helmsman, and rear carry handles
    • Extra seat attachment patches
    • Full length teardrop rubbing strake
    • Fiberglass coated v-shaped transom
    • Bailer valve
    • Foot pump
    • Carry bag (2 bags for the SPD-330E)
    • Maintenance kit
  • SU-14

    • Length 14'0" (425 cm)
    • Load Capacity 2230 lbs. (1010 kg)
    • Person Capacity 6
    • Maximum H.P. 55 long

    SU Series

    Sport utility series

    Built tough to work hard for rugged private and commercial use. SU boats are made with an additional heavy-duty layer of 840-denier nylon Achilles CSM fabric in a two-ply technique which results in a fabric even stronger than a single base fabric of equal thickness. A number of commercial grade features such as recessed valves and a full-length, protective wear patch combine to make these boats the right choice for the toughest marine uses. SU Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Extra durable double layer (840 denier each) nylon core fabric
    • Air keel
    • Aluminum and fiberglass floorboards and aluminum stringer system
    • Fiberglass encased transom with aluminum plate and motor pad
    • Fuel tank tie-downs
    • Heavy-duty bailer sleeve and two bailer valves
    • Extra-wide, heavy-duty full-length teardrop rubbing strake
    • Tie-down straps for paddles
    • Bow handle
    • Towing bridle D-rings
    • Lift and carry handles
    • Splash guard with life lines
    • Heavy-duty reinforced cargo wear patch all around
    • Extra tie-down D-rings
    • Heavy-duty recessed valves
    • Heavy-duty lifting points (hull and transom)
    • Two high-volume, large foot pumps
    • Maintenance kit
    SU Optional Features:
    • Wood seat & paddles.
     

    Double layer (840 denier each) nylon core fabric; reinforced with Achilles CSM Fabric and Chloroprene.
  • SU-16

    • Length 16'0" (488 cm)
    • Load Capacity 3170 lbs. (1440 kg)
    • Person Capacity 9
    • Maximum H.P. 75 long

    SU Series

    Sport utility series

    Built tough to work hard for rugged private and commercial use.SU boats are made with an additional heavy-duty layer of 840-denier nylon Achilles CSM fabric in a two-ply technique which results in a fabric even stronger than a single base fabric of equal thickness. A number of commercial grade features such as recessed valves and a full-length, protective wear patch combine to make these boats the right choice for the toughest marine uses. SU Standard Features include:
    • Achilles CSM reinforced fabric
    • Four-layer seam construction
    • Extra durable double layer (840 denier each) nylon core fabric
    • Air keel
    • Aluminum and fiberglass floorboards and aluminum stringer system
    • Fiberglass encased transom with aluminum plate and motor pad
    • Fuel tank tie-downs
    • Heavy-duty bailer sleeve and two bailer valves
    • Extra-wide, heavy-duty full-length teardrop rubbing strake
    • Tie-down straps for paddles
    • Bow handle
    • Towing bridle D-rings
    • Lift and carry handles
    • Splash guard with life lines
    • Heavy-duty reinforced cargo wear patch all around
    • Extra tie-down D-rings
    • Heavy-duty recessed valves
    • Heavy-duty lifting points (hull and transom)
    • Two high-volume, large foot pumps
    • Maintenance kit
    SU Optional Features:
    • Wood seat & paddles.
     

    Double layer (840 denier each) nylon core fabric; reinforced with Achilles CSM Fabric and Chloroprene.
Go to Top