Rigid Hull Archives - Page 2 of 2

Achilles Inflatable HB 335AX
HB-335AX

Length 11' 0" (335 cm)

Load Capacity 1210 lbs (550 kg)

Person Capacity 5

Maximum H.P. 25 Standard

HB-AX Series

Rigid hull series

New HB-335AX Pro Commercial and Rescue RIB!The Achilles HB-AX aluminum hull series expands again in 2019 with the addition of the HB-335AX PRO. This new model is only available in red for increased visibility and is designed for heavy duty commercial and rescue use. It has a full length splashguard with lifelines, abrasion/wear patches on top of the tubes, and has a paddle in place of oars and oarlocks. Like all Achilles HB-AX models it features a tough, powder coated marine grade aluminum hull with a full length keel guard to stand up to frequent beachings, coral, rocks, and other rough surfaces. The double heavy-duty rubbing strake on all HB-AX models offers addition protection to the tubes from rocks, docks, and pilings. All HB-AX models also come with a vented bow locker large enough to accommodate a gas tank, and the ability to run a fuel line under the deck that enables you to free up deck space that is usually taken up by the fuel tank and fuel line. It also helps distribute weight more evenly by moving the gas tank forward. The flat deck with non-skid patches also offers better traction, safety, and comfort. This unique design also allows water to flow under the deck to keep your feet dry if any water gets into the boat.New Seat and Console Kits Now Available!We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options. The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired. The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION). The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls. HB-AX Standard Features include:

Achilles CSM reinforced fabric

Four layer seam construction

Powder-coated aluminum hull with keel guard

Full length deck liner with non-skid patches

Bow locker

Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders

Interior oar straps

Double heavy-duty full length teardrop rubbing strake

Towing bridle D-rings

Welded bow eye, inside bow davit lifting eye, stern mounted davit lifting eyes, outside transom towing eyes

Protective transom motor clamp plate

Molded bow and stern lift and carry handles

Webbed passenger handles and helmsman handles

Removable aluminum rowing seat

Extra seat attachment patches

Bailer valve

Foot pump

Maintenance kit
Details
Achilles Inflatable HB 335AX PRO
HB-335AX-PRO

Length 11’0“ (335 cm)

Load Capacity 1210 lbs (550 kg)

Person Capacity 5

Maximum H.P. 25 Standard

HB-AX Series

Rigid hull series

New HB-335AX Pro Commercial and Rescue RIB!The Achilles HB-AX aluminum hull series expands again in 2019 with the addition of the HB-335AX PRO. This new model is only available in red for increased visibility and is designed for heavy duty commercial and rescue use. It has a full length splashguard with lifelines, abrasion/wear patches on top of the tubes, and has a paddle in place of oars and oarlocks. Like all Achilles HB-AX models it features a tough, powder coated marine grade aluminum hull with a full length keel guard to stand up to frequent beachings, coral, rocks, and other rough surfaces. The double heavy-duty rubbing strake on all HB-AX models offers addition protection to the tubes from rocks, docks, and pilings. All HB-AX models also come with a vented bow locker large enough to accommodate a gas tank, and the ability to run a fuel line under the deck that enables you to free up deck space that is usually taken up by the fuel tank and fuel line. It also helps distribute weight more evenly by moving the gas tank forward. The flat deck with non-skid patches also offers better traction, safety, and comfort. This unique design also allows water to flow under the deck to keep your feet dry if any water gets into the boat.New Seat and Console Kits Now Available!We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options.The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired. The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION). The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls. HB-335AX PRO Standard Features include:

Achilles CSM reinforced fabric

Four layer seam construction

Powder-coated aluminum hull with full length keel guard

Full length deck liner with non-skid patches

Vented bow locker

Paddle with interior paddle strap;

Double heavy-duty full length teardrop rubbing strake

Towing bridle D-rings

Welded bow eye, inside bow davit lifting eyes, stern mounted davit lifting eyes, outside transom towing eyes

Protective transom motor clamp plate

5 molded lift and carry handles

Full length splashguard with lifeliness

Seat or gear bag attachment patches

Extra seat attachment patches

Bailer valve

Foot pump

Maintenance kit
Details
Achilles Inflatable HB 350LX
HB-350LX

Length 11’6” (350 cm)

Load Capacity 1680 lbs. (760 kg)

Person Capacity 6

Maximum H.P. 20 standard

HB-LX Series

Rigid hull series

A lightweight rigid hull series packed with high performance features.The Achilles HB-LX boats provide the critically acclaimed performance of the Achilles DX deep “V” fiberglass hull design in a lighter RIB. They also have the same tube design as the DX series, yet a modification of the deck design and removing the bow locker results in a RIB that is on average 20% lighter than the same size DX model.This means they can perform well with smaller engines and can be carried or transported more easily. Despite their lighter weight and lower cost compared to the HB-DX series, they are still loaded with all the high quality standard features for which Achilles is known.New Seat and Console Kits Now Available! We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options. The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired. The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION). The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls. HB-LX Standard Features include:

Pearl Gray Achilles CSM reinforced fabric

Four-layer seam construction

Deep “V” fiberglass hull

Full-length teardrop rubbing strake

Removable wood rowing seat

D-rings for towing bridle

Stainless bow eye

Lifting hardware for davits

Webbed passenger, helmsman, and rear carry handles

Bow carry handle

Interior oar straps (except HB240-LX)

Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders

Gas tank tie down hardware

Protective transom motor clamp plate

Extra seat attachment patches (except HB240-LX)

Bailer valve

Foot pump

Maintenance kit
Details
Achilles Inflatable HB 385DX
HB-385DX

Length 12'8" (385 cm)

Load Capacity 1790 lbs. (810 kg)

Person Capacity 7

Maximum H.P. 40 long

HB-DX Series

Rigid hull series

These deluxe hard bottom inflatables offer boaters the best combination of style, performance and functionality.Sleek, Euro-style tubes give them a stylish edge over other RIB’s. A deep “V” fiberglass hull delivers superior performance while a built-in bow locker provides both a seat and a place for gear. If you want to take a step above the norm in a hard-bottomed tender, step up to an Achilles HB-DX RIB. Like every Achilles boat they are made with our own Achilles CSM fabric so they can handle the burning sun of the tropics or cold northern waters without fading or deteriorating. Choose a rigid-hulled inflatable that gives you a little extra. Choose an Achilles HB-DX.New Seat and Console Kits Now Available!We are now offering the perfect solutions for you to turn the best "open" RIB's on the market into the best "Deluxe" RIB's. We are now offering three different seat and console options. The "Deluxe" The Deluxe seat and console kit (part #HB4SCKIT) package includes a bench seat with folding backrest, a console with base and steering helm, and a cushion for the forward bow locker and is very attractively priced. The unique design of the console allows the base to be mounted as shown with a side seat (in the HB315DX) or it can also be mounted fore to aft in the HB350DX and HB385DX if a console with a forward-facing seat if desired. The "Basic" The basic seat and console kit (part #HBSCBASIC) is a 2-piece kit that has a one-piece console with steering helm and a fold down seat base. This option offers you the least expensive way to turn your open Achilles into a console boat. Although it doesn't come with a bow cushion – one can be ordered as an option for this kit or for any open DX RIB (part #HBBOWCUSHION). The Hula-Helm The Hula-Helm (part #HBHULAHELM) is a unique one-piece tubular stainless-steel seat and console combination unit that has a folding steering arm and seatback which allows the unit to become very low profile. This is convenient when trailering the boat, covering the boat, and may also be beneficial when mounting the boat on davit systems. It may also enable the boat to be stored in a "garage" on a larger yacht. It has a large fiberglass storage box under the seat cushion, and a fiberglass piece on which the steering helm is mounted. This area can also be used to install gauges, switches, and your engine controls. HB-DX Standard Features include:

Achilles CSM reinforced fabric

Four-layer seam construction

Deep “V” fiberglass hull

Bow locker

Double heavy-duty full-length teardrop rubbing strake

Extra seat attachment patches

Helmsman grip

Removable aluminum rowing seat (Except HB-385DX which has a wooden seat)

D-rings for towing bridle

Stainless bow eye

Lifting hardware for davits

Molded rubber bow handle, carry handles, and helmsman grip

Webbed passenger handles

Interior oar straps

Fold-down locking oar system with two-piece breakdown aluminum oars and oar holders (HB-385DX has paddle)

Gas tank tie down hardware

Protective transom motor clamp plate

Bailer valve

Foot pump

Maintenance kit
Details